Saturn Accessories and Parts Installation And Review Videos

Demco SBS Wireless Coachlink Installation - 2008 Saturn Vue- Video

Today on our 2008 Saturn Vue we're going to take a look at and also show you how to install the SMI Coachlink 900. This is a wireless transmitter and receiver braking indicator set. Part number is SM99945. All right, here's what our Coachlink system's going to look like. We're going to have the monitor for the receiver portion. This is going to basically just plug into 12 volt power in your coach, and we'll put it somewhere visible up on our dashboard. more

4/13/2017 10:12:06 AM

Trailer Brake Controller Installation - 2008 Saturn Outlook- Video

Today on this 2008 Saturn Outlook were going to install part number HM47297 from Hopkins. This is the Insight Flexi-Mount trailer brake controller. At this point well go ahead and remove the trim panel below the dashboard. One thing to know about our install is were going to use the existing tow package plug thats existing in the vehicle, part number HM47875. This is Hopkins plug-in simple brake control wiring adapter. Well go ahead and plug that in to our tow package port. more

11/7/2013 12:53:18 PM

Trailer Brake Controller Installation - 2008 Saturn Outlook 90885- Video

Today on our 2008 Saturn Outlook, we'll be installing the Tekonsha Prodigy P2 Brake Controller, part number 90885, in conjunction with the ETBC7 7 and 4-way installation kit, part number ETBC7. Our first step will be mounting our new 4 and 7-way plug and mounting bracket. The bracket and attachment hardware comes with the installation kit. Let's go ahead and mount the bracket to the 7-pole. Next, we'll go ahead and mount the 7-pole bracket to the hitch bracket. Again, the hardware is provided with our install kit. more

11/21/2012 3:17:47 AM

TrailerMate Trailer Connector Installation - 2007 Saturn Vue- Video

Today on our 2007 Saturn Vue, we'll be installing the trailer-made custom taillight four-pole flat trailer connector, part number TM85340. This will plug in directly to the trailer-made custom four-pole wiring kit for towed vehicles. To connect our new four-pole, we'll simply remove the plug cover and plug directly into the tow port. Then, we'll need to mount the converter box. To do this, we'll take a self-tapping screw and run it directly into the overlap of the body sheet metal. Next, we'll take the white wire, which is a ground wire for our converter box and has a pre-attached ring terminal. more

11/13/2012 10:08:14 AM